- Lubricants
- Assembly Paste
- Oil
- Grease
- Advance Bearing Grease
- Anticorrosion Grease
- Barium Complex (Mineral)
- Barium Complex (Synthetic)
- Bearing Grease EP
- Bearing Lubricant
- Bicycle Maintenance & Repair
- Calcium Sulfonate Complex Grease Water Resiistant
- Electric Copper Grease
- Electric Motor Bearing Grease
- Electrical Contact Grease
- Fluid Grease Multipurpose EP
- Bearing Greases
- Synthetic Grease
- Degreaser
- Insulations
- Vacuum Pump
- Antirust
- Food Grade Grease
- Food Grade Oil
- Punching Oil
- Hydraulic Oils
- Galvanized
- Cleaner
- Antiseize
- Aviation Oil
- Aviation Grease
- PPG Sealant
- Nabakem
AEROSHELL OIL 80 MIL-L-6082E
AeroShell straight mineral oils are blended from selected high viscosity index base stocks. These oils do not contain additives except for a small quantity of pourpoint depressant (which is added when improved fluidity at very low temperature is required) and an anti-oxidant.
| Brand |
Aeroshell |
|---|
Description
AeroShell Oil 80
AeroShell straight mineral oils are blended from selected high viscosity index base stocks. These oils do not contain additives except for a small quantity of pourpoint depressant (which is added when improved fluidity at very low temperature is required) and an anti-oxidant.
The appropriate grades of these AeroShell Oils are approved for use in four-stroke cycle (four-cycle) certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification SAE J1966 (MIL-L-6082) and which do not require use of an oil containing a dispersant additive.
AeroShell Oils are used primarily during break-in of most new or recently overhauled four-stroke cycle aviation piston engines. The duration and lubrication recommendations for break-in vary, so operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations.
