- Lubricants
- Assembly Paste
- Oil
- Grease
- Advance Bearing Grease
- Anticorrosion Grease
- Barium Complex (Mineral)
- Barium Complex (Synthetic)
- Bearing Grease EP
- Bearing Lubricant
- Bicycle Maintenance & Repair
- Calcium Sulfonate Complex Grease Water Resiistant
- Electric Copper Grease
- Electric Motor Bearing Grease
- Electrical Contact Grease
- Fluid Grease Multipurpose EP
- Bearing Greases
- Synthetic Grease
- Degreaser
- Insulations
- Vacuum Pump
- Antirust
- Food Grade Grease
- Food Grade Oil
- Punching Oil
- Hydraulic Oils
- Galvanized
- Cleaner
- Antiseize
- Aviation Oil
- Aviation Grease
- PPG Sealant
- Nabakem
G. BESLUX TRIBOPASTE L-2/3 S
G. BESLUX TRIBOPASTE L-2/3 S belongs to the utmost lubricant technology and was designed for the
lubrication of mechanisms exposed to slow motion, heavy loads, and shock strength. Provides life lubrication and superior protection against fretting corrosion.
| Brand |
Brugarolas |
|---|
Description
HIGH EFFICIENCY LUBRICATING PASTE
G. BESLUX TRIBOPASTE L-2/3 S belongs to the utmost lubricant technology and was designed for the
lubrication of mechanisms exposed to slow motion, heavy loads, and shock strength. Provides life
lubrication and superior protection against fretting corrosion.
MAIN BENEFITS:
High resistance to fretting corrosion.
High lubricating capacity.
Wide range of operating temperatures (- -40 to 150ºC).
Dry lubrication 400ºC.
High adherence.
For life lubrication.
Superior resistance to heavy loads.
INTENDED FOR:
⇒ Grooved joints.
⇒ Ball joint type drives.
⇒ Multipurpose mounting paste.
⇒ Mounting of shafts, bolts etc. wherever facing corrosion problems.
⇒ Lubrications of bushings and sliding bearings.
CAUTIONS:
* Do not mix with different nature greases.
* Keep the can closed to avoid contamination.
* The usual ones when handling and using lubricants.
SPECIFIED CHARACTERISTICS:
| Thickener (soap type) | lithium | |
| Base oil nature | Synthetic | |
| Unworked penetration 25ºC | (ASTM D-217) | 235-265 x 0,1 mm |
| Worked penetration 60W | (ASTM D-217) | 245-275 x 0,1 mm |
| Dynamic viscosity at 25ºC | (G047) | 4500-7500 mPas |
| Drop point | Min. 200ºC | |
| Flow pressure at –40ºC | (DIN 51805) | Max. 1400 mbar |
GENERAL CHARACTERISTICS:
| Color | - | White |
| Density at 25ºC | - | 1,16 gr/cm3 |
| Flow pressure at –35ºC | (DIN 51805) | 505 mbar |
| 4 balls | (IP-239) | |
| − Welding load | - | >500 Kg |
| − Wear scar diameter 1'/80 Kg | - | 0,42 mm |
| SRV, 300 N, 1,2 mm, 15 Hz, 50ºC, 1 hr | - | |
| − Friction coefficient, minimum | - | 0,106 |
| − Friction coefficient, maximum | - | 0,108 |
| − Final friction coefficient | - | 0,106 |
| − Curve development | - | smooth slope down |
| FAFNIR test (fretting corrosion) | (ASTM D-4170) | |
| − Weight loss | - | 0,005 % |
| − Corrosion | - | nil |
| − Operating temperature | - | -40 to 150ºC dry film 400ºC |
