- Lubricants
- Assembly Paste
- Oil
- Grease
- Advance Bearing Grease
- Anticorrosion Grease
- Barium Complex (Mineral)
- Barium Complex (Synthetic)
- Bearing Grease EP
- Bearing Lubricant
- Bicycle Maintenance & Repair
- Calcium Sulfonate Complex Grease Water Resiistant
- Electric Copper Grease
- Electric Motor Bearing Grease
- Electrical Contact Grease
- Fluid Grease Multipurpose EP
- Bearing Greases
- Synthetic Grease
- Degreaser
- Insulations
- Vacuum Pump
- Antirust
- Food Grade Grease
- Food Grade Oil
- Punching Oil
- Hydraulic Oils
- Galvanized
- Cleaner
- Antiseize
- Aviation Oil
- Aviation Grease
- PPG Sealant
- Nabakem
G. BESLUX ATOX TF–S
High performance lubricant formulated with high thermical resistance, synthetic
oil. It have a high chemical stability and resistance to aging and high lubricating
capacity. Contains “Teflon®” solid lubricants, which reduce the friction
coefficient.
| Brand |
Brugarolas |
|---|
Description
HIGH PERFORMANCE, SYNTHETIC OIL BASE AND WITH
“TEFLON®” ATOXIC LUBRICANT
DESCRIPTION:
High-performance lubricant formulated with high thermal resistance, synthetic
oil. It has a high chemical stability and resistance to aging and high lubricating
capacity. Contains “Teflon®” solid lubricants, which reduce the friction
coefficient.
GENERAL APPLICATIONS:
• Any kind of mechanisms working under wide range of temperatures, from
–40ºC till 180ºC
• Bearings working at high temperature : 180ºC (peck 200ºC)
• Slides, chains, articulations and any type of mechanisms on food
industry
• Medium-High speed Bearings : Dn = 500.000
• Plastics and Plastic metal contact lubrication
• Lubrication of bearings inside ovens, on food industry
• Any kind of mechanism requiring lubricants with “Teflon®”
ADVANTAGES:
• Outstanding thermal stability
• High lubrication capacity
• Long life solid lubricants “Teflon®”
• Good compatibility with elastomers and plastic materials
• Food Grade Grease, USDA H-1
SPECIFICATION CHARACTERISTICS:
| Colour | White |
| Thickener | Inorganic |
| Worked Penetration 60 w (ASTM D-217) 0.1 mm | 250 – 280 |
| Drop Point ( ASTM D-56) | 300 ºC |
GENERAL CHARACTERISTICS:
| Shell Four balls test ( IP-239) - Welding Load, min - scar diameter 1h/40 kg, max | 400 kgf 0.6 mm |
| Emcor Corrosion Test (DIN 51802) max | 0 / 0 |
| Copper corrosion at 100 ºC (ASTM D-4048) | 1 b |
| Oxidation stability at 100ºC (ASTM D-942) | 0.5 kg/m^2 |
| Evaporation Loss at 100 ºC (ASTM D-972) | 1 % |
| Water washout at 90ºC (DIN 51807) max | 1 |
| Oil Separation at 40ºC (DIN 51817) max | 3 % |
| Dynamic viscosity at 25ºC (Haake) | 2.800–4.500 mPa.s |
| Continuous working Temperature | -40ºto 180ºC |
