- Lubricants
- Assembly Paste
- Oil
- Grease
- Advance Bearing Grease
- Anticorrosion Grease
- Barium Complex (Mineral)
- Barium Complex (Synthetic)
- Bearing Grease EP
- Bearing Lubricant
- Bicycle Maintenance & Repair
- Calcium Sulfonate Complex Grease Water Resiistant
- Electric Copper Grease
- Electric Motor Bearing Grease
- Electrical Contact Grease
- Fluid Grease Multipurpose EP
- Bearing Greases
- Synthetic Grease
- Degreaser
- Insulations
- Vacuum Pump
- Antirust
- Food Grade Grease
- Food Grade Oil
- Punching Oil
- Hydraulic Oils
- Galvanized
- Cleaner
- Antiseize
- Aviation Oil
- Aviation Grease
- PPG Sealant
- Nabakem
G. A. PLEX-2
G. A. PLEX-2 is a family of complex soap and mineral oil
greases with extreme pressure additives for rolling and
plain bearings with a medium number of revolutions. It has
good behavior against water and excellent resistance to
loads and high temperatures.
| Brand |
Brugarolas |
|---|
Category: High Performance Lubricating Grease
Tags: cardan type joints grease, complex soap grease, couplings grease, electric motors grease, Excellent anti wear power grease, Extreme pressure grease, Good antioxidant capacity grease, Good protection against corrosion grease, Grease, high drop point grease, High load grease, high performance lubricating grease, High temperature grease, Insoluble in water grease, Lithium-complex grease, Long duration grease, Mineral oil grease, Plain bearings grease, Resistance to high loads grease, Resistance to mechanical work grease, Water pumps Grease, water resistance grease, Wheel bearings Grease
Description
HIGH PERFORMANCE LUBRICATING GREASE FOR HIGH LOADS AND TEMPERATURES
DESCRIPTION:
G. A. PLEX-2 is a family of complex soap and mineral oil
greases with extreme pressure additives for rolling and
plain bearings with a medium number of revolutions. It has
good behavior against water and excellent resistance to
loads and high temperatures.
APPLICATIONS:
G. A. PLEX-2 can be used in wheel bearings, water pumps,
electric motors, couplings, cardan type joints and in general
where a high-performance grease with severe demands is
required.
ADVANTAGES:
• High drop point.
• Resistance to high loads.
• Excellent anti-wear power.
• Resistance to mechanical work.
• Insoluble in water.
• Good protection against corrosion.
• Good antioxidant capacity.
• Long duration.
CAUTION:
− Normal precautions should be taken in the use and
handling of lubricants.
− Keep the container closed to avoid contamination.
− Avoid mixing this grease with others of a different
base.
PHYSICAL – CHEMICAL CHARACTERISTICS:
| CHARACTERISTICS | STANDARD | TYPICAL VALUE |
|---|---|---|
| Colour | - | Brown |
| Thickener | ASTM D-128 | Lithium complex |
| Base oil | ASTM D-128 | Mineral |
| NLGI consistency | DIN-51818 | Grade 2 |
| Penetration at 25ºC | ASTM D-217 | 275 (0.1 mm) |
| Worked penetration 60W | ASTM D-217 | 275 (0.1 mm) |
| Worked penetration 10^5W | ASTM D-217 | +40 (0.1 mm) |
| Drop point | ASTM D-566 | 280ºC |
| 4 balls test • Welding load • Wear 1h/40kg | IP-239 | Min. 450 kgf Max. 0.55 mm |
| EMCOR corrosion test | DIN-51802 | Max. 1 |
| Copper corrosion 24h/100ºC | ASTM D-4048 | Max. 1b |
| Oxidation stability 100h/100ºC | ASTM D-942 | Max. 0.3 kg/cm2 |
| Water resistance 3h/90ºC | DIN-51807 | Grade 1 |
| Flow pressure at -20ºC | DIN-51805 | Max. 1600 mbar |
| Evaporation loss, • 22h/100ºC • 22h/150ºC | ASTM D-972 | Max. 0.5 Max. 2.5 |
| Application temperature | - | -20 to 150ºC |




